How to Flash firmware

How to Know Which Firmware in Your Frsky Radio Controller (FCC / LBT)
The best way to find out which firmware you have on your radio is to go to the model screen on your taranis, and go to the internal RF mode setting. Dependi...
Wed, 4 Sep, 2019 at 4:24 PM
How to Flash Firmware for Lite FC
The only method to restore the factory PID is via reflashing the firmware for the moment. About how to flash the firmware, please check this thread on S...
Wed, 13 Jun, 2018 at 2:58 PM
How to Flash Brushed Betaflight Firmware
If you wish to flash a different firmware or update Betaflight to the newest version, please follow these steps. This manual is available for all BETAFP...
Sat, 30 Jun, 2018 at 10:50 AM
How to Flash the Betaflight Firmware From SPI Frsky into SPI Futaba on Brushless Pro Series
As the receiver hardware circuit of Frsky is the same as Futaba's, so the betaflight firmware are switchable between Frsky and Futaba. So if you buy th...
Thu, 22 Aug, 2019 at 3:32 PM
How to Flash ESC Firmware to JESC Firmware
Note: Only the following Betafpv FC could support JESC Firmware - Toothpick F4 2-4S AIO Brushless FC 12A, Toothpick F4 2-4S AIO Brushless FC 20A, F4 AIO 2-4...
Wed, 11 Dec, 2019 at 7:18 PM
How to Flash Firmware for F4 2-4S AIO 12A Brushless FC
Note: The firmware version of the newest batch is 4.0.3, which is not compatible with default PID, so please flash the firmware to 3.5.3. Follow below steps...
Fri, 30 Aug, 2019 at 11:00 AM